 | $ 32.95 Call us for Availability
A Polymer-Modified Vertical Stamping Mix
Printable Version | PRODUCT DESCRIPTION
LunaCrete® Vertical Stamp Mix is a high performance blend of quality Portland Cement, modified Co-Polymers, Lightweight aggregate, Water Reducers and Accelerants. It is a lightweight mixture that is designed specifically for
vertical stamping. The material is off white in color and will work with our Color Pack system or can be chemically stained. It is designed for maximum strength, flexibility, adhesion, abrasion resistance, and freeze/thaw resistance. By
having all of the necessary ingredients pre-blended in a controlled environment, proper ratios of additives to cement and cement to pigments is consistent. Pre-blending promotes product consistency and color consistency. Because of the
unusual characteristics of this formulation, it may be used for many different applications.
PRODUCT USES
LunaCrete® Vertical Stamp Mix can be used for variety of vertical applications and is designed to cover almost any type of sub straight. Vertical Stamp Mix is ideal for coating and stamping over concrete walls, cinder block, drywall and even ICF foam.
With Vertical Stamp Mix contractors can create beautiful walls, building facades, fireplaces, waterfalls, endless simulated stone designs and nature scapes. Because the product is lightweight, Vertical Stamp Mix can build up to 2-inches thick with no sagging and even thicker applications may be achieved with multiple coats.
MIXING INSTRUCTIONS
Scratch Coat- In a pail, mix 2 quarts Liquid Co-Polmyer with 8 quarts of water, Mix for 2 minutes
Stamp Coat- In a pail, mix 2 quarts Liquid Co-Polmyer with 7 quarts of water, Mix for 2 minutes
Note: Do not over mix the product on high speeds, as this can entrain excessive air into the mix.
APPLICATION
See LunaCrete’s vertical stamping application instructions.
COVERAGE
40Lb Bag
15 sq/ft at ½ ” Thick
7. sq/ft at 1” Thick
TECHNICAL SPECIFICATIONS
Compressive Strength
28 Day Cure 2761 psi
Flexural Strength
28 Day Cure 439 psi
Weight
78 Lbs per cubic foot
LIMITED WARRANTY: This product is warranted to be of uniform quality within manufacturing tolerances. Since no control is exercised over its use,
No warranty expressed or implied, is made as to the effect of such use. Seller’s and Manufacturer’s obligation under this warranty shall be limited to refunding
the purchase price of that portion of the material proven to be defective. Material Safety Data
for Vertical Stamp Mix | SUPPLIER IDENTIFICATION LunaCrete® 1111 H. Enterprise Court Holly Hill, FL 32117 386-252-4243
Emergency Phone Number:
1-800-424-9300
Vertical Stamp Mix may be used to comply with OSHA's Hazard Communication Standard (HCS), 29 CFR 1910, 1200. Standard must be consulted for specific requirements.
The precise composition of this product is proprietary information. A more complete disclosure can be provided in the event of a medical emergency.
HMIS Hazardous Materials Identification System | HEALTH | 1 | FIRE | 0 | REACTIVITY | 0 | PROTECTION | E |
HMIS Number Codes
4 - Severe
3 - Serious
2 - Moderate
1 - Slight
0 - Minimal
HMIS Protective Equipment Codes
A - safety glasses
B - safety glasses and gloves
C - safety glasses, gloves and an apron
D - face shield, gloves and an apron
E - safety glasses, gloves and a dust respirator
F - safety glasses, gloves, apron and a dust respirator
G - safety glasses, a vapor respirator
H - splash goggles, gloves, apron and a vapor respirator
I - safety glasses, gloves and a dust/vapor respirator
J - splash goggles, gloves, apron and a dust/vapor respirator
K - airline hood or mask, gloves, full suit and boots
The Material Safety Data provided on this website is correct to the best of our knowledge, information and belief at the date of its publication. The information given is designed only as a guide for safe handling, use, processing, storage, transportation, disposal and release and is not to be considered as a warranty or quality specification. The information relates only to the specific material designated and may not be valid for such material used in combination with any other material or in any process, unless specified in the text.
Product will perform as indicated by product specification sheet. Any adulteration will negate LunaCrete liability. | HAZARDOUS INGREDIENTS/IDENTITY INFORMATION
COMPONENTS:
Silica Crystaline Quartz
CAS #:144808-60-7
PER CENT:10%-30%
OSHA PEL:8H TWA 0.1 mg(Quartz/m3) (Respirable dust)
ACGIH TLV:TWA 0.1 0.1 mg/m3 (Respirable dust)
Portland Cement
CAS #:6599-15-1
PER CENT:70%-90%
OSHA PEL:8H TWA 10mg/m3 (Total Dust)
ACGIH TLV: 50 MPPCF
Major = Over 25 % , Minor = Over 6. 25 % , Trace = Under 6 %, Residue = Unknown % residue possible
PHYSICAL/CHEMICAL CHARACTERISTICS
SPECIFIC GRAVITY (H2O = 1): 2.5
EVAPORATION RATE (Butyl Acetate = 1): None
MATERIAL V.O.C.: None
APPEARANCE & ODOR: Light Gray Finely Ground, Odorless
SOLUBILITY IN WATER: Slight
% VOLATILE BY VOLUME: 0
FIRE & EXPLOSION HAZARD DATA
FLASH POINT:
N/A
FLAMMABLE LIMITS IN AIR BY VOLUME:
LOWER: N/A UPPER: N/A
EXTINGUISHING MEDIA:
Non combustible. Use extinguishing method suitable for surroundings.
No Fire or Explosion Hazard
SPECIAL FIREFIGHTING PROCEDURES:
Wear self-contained breathing apparatus with full face-piece, operated in pressure demand or other positive pressure mode. Wear full body protective clothing.
UNUSUAL FIRE & EXPLOSION HAZARDS:
Non combustible
REACTIVITY DATA
STABILITY: STABLE
CONDITIONS TO AVOID:
Dusting conditions
INCOMPATIBILITY (CONDITIONS OR MATERIALS TO AVOID):
Avoid contact with strong alkalies or strong acids
HAZARDOUS DECOMPOSITON OR BYPRODUCTS:
None known
HAZARDOUS POLYMERIZATION:
Will Not Occur
HEALTH HAZARD DATA
A) HEALTH HAZARDS
INHALATION HEALTH RISKS AND SYMPTOMS OF EXPOSURE
Inhalation may cause irritation of respiratory tract and could promote coughing, dizziness and headache.
EYE CONTACT HEALTH RISKS AND SYMPTOMS OF EXPOSURE
Eye contact: Direct contact irritates slightly with redness and swelling.
SKIN ABSORPTION HEALTH RISKS AND SYMPTOMS OF EXPOSURE
Prolonged exposure can dry and defat skin causing cracks, irritation and dermatitis
INGESTION HEALTH RISKS AND SYMPTOMS OF EXPOSURE
Ingestion: Can cause gastrointestinal irritation.
CARCINOGENICITY:
NTP: NO
IARC MONOGRAPHS: NO
OSHA REGULATED: NO
MEDICAL CONDITIONS GENERALLY AGGRAVATED BY EXPOSURE
Dermatitis, respiratory tract irritation.
B) EMERGENCY AND FIRST AID PROCEDURES
INGESTION:
No harmful affects expected. If appreciable quantities are swallowed, call poison control center or physician. Do not leave victim unattended.
INHALATION:
If respiratory irritation or distress occurs, remove victim to fresh air. Seek medical attention if respiratory irritation or distress continues.
SKIN ABSORPTION:
If contact to the skin, wash thoroughly with soap and water. Seek medical attention if irritation or distress continues.
EYE CONTACT:
If contact with eyes, hold eyes open and flush with a steady, gentle stream of water for at least 15 minutes. Seek medical attention if irritation or visual changes occur.
PRECAUTIONS FOR SAFE HANDLING & USE
STEPS TO BE TAKEN IN CASE MATERIAL IS RELEASED OR SPILLED
Sweep up material and remove to disposal container. Mop with mild detergents or cleaning solutions. Observe all relevant federal, state and local laws.
WASTE ISPOSAL METHOD
Normal waste disposal. Avoid slurry of material may plug drains. Obey relevant laws.
PRECAUTIONS TO BE TAKEN IN HANDLING & STORING
Handling: Use a dustless system for storage and clean up if possible (Vacuum - Floor cleaner).
Wear gloves, eye protection and wear approved respirator. Wash hands before eating , drinking, using tobacco, applying cosmetics or using toilet.
Storage: do not store, use and/or consume foods, beverages, tobacco products or cosmetics in areas where this material is stored
OTHER PRECAUTIONS
Practice Good Housekeeping, any food, drink or chewing product should be protected from the dust. Protect skin from prolonged contact with wet cement. Precaution must be taken because cement burns occur with little warning - Little heat is sensed.
Before using any LunaCrete products, read the label thoroughly.
CONTROL MEASURES
RESPIRATORY PROTECTION
Dust mask recommended- NIOSH or OSHA approved Standard #1910.134.
VENTILLATION
Use local exhaust ventilation to control emissions at its source, preventing dispersion of it in the general work area.
PROTECTIVE GLOVES
Gloves may be worn for protection if skin is sensitive. (latex, neoprene, nitrile rubber)
EYE PROTECTION
Use safety glasses, goggles or face-shields for eye protection.
OTHER PROTECTIVE CLOTHING OR EQUIPMENT
None
WORK/HYGIENE PRACTICES
Avoid breathing dust. Wash hands thoroughly after handling and keep containers closed. |
For additional information contact: LunaCrete® 1111 H. Enterprise Court Holly Hill, FL 32117 (866) 386-9122 - Toll Free |  | If you have already purchased access to an online video, |
|
|
Professional Products |
Online Catalog |
Complete DVD Set |
|
