 | $ 66.50 Call us for Availability
TOUGH SEAL WB IS A TWO PART TOUGH SOLVENT RESISTANT SEAL FOR STAINED CONCRETE FLOORS AND ALL CONCRETE SURFACE.
Printable Version | Enviromental ImpactToughseal WB contains VOC exempt solvents only and no heavy metals or environmentally harmful substances. ApplicationsApply Toughseal WB to all types of stained or stamped concrete floors where solvent resistance is essential such as garage floors, food processing areas and other areas are exposed to solvents or other chemicals. Benefits Seals and enhances the color of stained concrete in one easy simple application. Low odor: Toughseal WB is a low solvent water based seal that is safe to use indoors and out with no strong solvent odors. Non-Flammable: Toughseal WB eliminates the flammability hazard of solvent based sealers. Cures to a tough, solvent and abrasion resistant coating. Once Toughseal WB has cured for 48 hours it is a strong water resistant and abrasion resistant coating. After 14 days, it is resistant to solvents and chemicals. Easy clean up: Equipment and container are easily cleaned up with water if cleaned before the sealer cures. How To Use For each one gallon of part A, add 8oz. of part B, and mix thoroughly for 5 minutes. Do not mix more than can be used in 5 hours Apply in a thin uniform coat. Let it dry for 1 hour and apply a second thin coat. Let the coating cure for 48 hours before allowing traffic on the area. The coating will acquire about 70% of final strength in 48 hours and will continue to increase in strength and chemical resistance for one week. Fully cured Toughseal WB will resist abrasion and solvent attack. Properties Type: Cationic acrylic aqueous sealer Colors: Light amber. Odor: Mild Toxicity: Low VOC’s: Very low Flammability: Non-flammable Composition: Acrylic resin solution plus epoxy silicone cross linking agent. Material Safety Data
for Tough Seal WB Part A | SUPPLIER IDENTIFICATION LunaCrete® 1111 H. Enterprise Court Holly Hill, FL 32117 386-252-4243
Emergency Phone Number:
1-800-535-5053
Tough Seal WB may be used to comply with OSHA's Hazard Communication Standard (HCS), 29 CFR 1910, 1200. Standard must be consulted for specific requirements.
The precise composition of this product is proprietary information. A more complete disclosure can be provided in the event of a medical emergency.
The Material Safety Data provided on this website is correct to the best of our knowledge, information and belief at the date of its publication. The information given is designed only as a guide for safe handling, use, processing, storage, transportation, disposal and release and is not to be considered as a warranty or quality specification. The information relates only to the specific material designated and may not be valid for such material used in combination with any other material or in any process, unless specified in the text.
Product will perform as indicated by product specification sheet. Any adulteration will negate LunaCrete liability. | PART A
Evaluation for OSHA HCS: Non-Hazardous
GENERAL INFORMATION
Chemical Family: Mixture
HAZARDOUS INGREDIENTS
Principal Hazardous Components
Glycidoxypropyl trimethoxysilane (2530-83-8)
Threshold Limit Value (Units) NE
2,butoxy ethanol (111-76-2)
Threshold Limit Value (Units) 50 ppm
PHYSICAL DATA
Boiling Point (ºF) ~212° F
Specific Gravity (H20=1)c ~1.04
Vapor Pressure (mm Hg) NE
Percent Volatile By Volume NA
Vapor Density (Air=1) >1
Evaporation Rate (H2O=1) ~1
Solubility in Water partial
pH NA
Appearance & Odor: Clear straw color liquid with slight solvent odor
FIRE & EXPLOSION HAZARD DATA
Flash Point (Test Method): >140° F (TCC) Flammable Limits:LEL NE UEL NE
Extinguishing Media: Water, dry chemical, CO2, foam
Special Fire Fighting Procedures: Wear self contained breathing apparatus and protective clothing. Cool containers with water spray.
Unusual Fire & Explosion Hazards: None known
HEALTH HAZARD DATA
OSHA Permissible Exposure Limit NE
ACGIH Threshold Limit Value NE
Carcinogen
NTP Program NO
IARC Program NO
Symptoms of Over Exposure:
EYES: Irritation, redness. –
INHALATION: Irritation to nose and throat, possible headache. –
INGESTION: Nausea, headache, stomach upset. Product may generate methanol which can cause blindness. –
SKIN: Mild irritation, drying.
Medical Conditions Aggravated by Exposure: Skin sensitivity.
Primary Route(s) of Entry: Skin
Emergency First Aid: EYES: Flush with water for 15 minutes, lifting both eyelids. If irritation persists, GET MEDICAL HELP.
INGESTION: Do Not Induce Vomiting. Rinse mouth with water and GET IMMEDIATE MEDICAL HELP. Never give anything by mouth to an unconscious person.
INHALATION: Remove to fresh air immediately. If breathing difficulties continue, GET MEDICAL HELP.
SKIN: Wash with soap and water. Remove and launder contaminated clothing before reuse.
REACTIVITY DATA
Stability
Stable
Conditions to Avoid: High temperatures
Incompatibility Materials to Avoid: Strong oxidizing agents. Water can cause methanol liberation.
Hazardous Polymerization No
Conditions to Avoid: NA
Hazardous Decomposition Products: CO, organic vapors.
ENVIRONMENTAL PROTECTION PROCEDURES
Spill Response: Extinguish all flames. Wear protective gloves. Absorb on absorbent material and place in a sealable can.
Waste Disposal Method: Seal can and dispose of in accordance with local and federal regulations.
SPECIAL PROTECTION INFORMATION
Eye Protection: Goggles
Skin Protection: Solvent resistant gloves
Respiratory Protection (Specific Type): NA
Ventilation Recommended:
General Mechanical
Other Protection: None
Hygienic Practices in Handling & Storage:
Wash hands after using. Do not contaminate food or feed stuff.
Precautions for Repair & Maintenance of Contaminated Equipment: Flush thoroughly with water.
Other Precautions: Read all label directions and precautions. Keep from freezing.
TRANSPORT INFORMATION
Identification Number NA – Non-hazardous
Proper shipping name NA
Class/Division NA
Packaging Group NA |
For additional information contact: LunaCrete® 1111 H. Enterprise Court Holly Hill, FL 32117 (866) 386-9122 - Toll Free Material Safety Data
for Tough Seal WB Part B | SUPPLIER IDENTIFICATION LunaCrete® 1111 H. Enterprise Court Holly Hill, FL 32117 386-252-4243
Emergency Phone Number:
1-800-535-5053
Tough Seal WB may be used to comply with OSHA's Hazard Communication Standard (HCS), 29 CFR 1910, 1200. Standard must be consulted for specific requirements.
The precise composition of this product is proprietary information. A more complete disclosure can be provided in the event of a medical emergency.
NFPA National FireProtection Association | TOXICITY [HEALTH] | 2 | FIRE | 1 | REACTIVITY | 0 | SPECIAL | C |
NFPA Number Codes
4 - Extreme
3 - High
2 - Moderate
1 - Slight
0 - Insignificant HMIS Hazardous Materials Identification System | HEALTH | 2 | FIRE | 1 | REACTIVITY | 0 | PROTECTION | |
HMIS Number Codes
4 - Severe
3 - Serious
2 - Moderate
1 - Slight
0 - Minimal
HMIS Protective Equipment Codes
A - safety glasses
B - safety glasses and gloves
C - safety glasses, gloves and an apron
D - face shield, gloves and an apron
E - safety glasses, gloves and a dust respirator
F - safety glasses, gloves, apron and a dust respirator
G - safety glasses, a vapor respirator
H - splash goggles, gloves, apron and a vapor respirator
I - safety glasses, gloves and a dust/vapor respirator
J - splash goggles, gloves, apron and a dust/vapor respirator
K - airline hood or mask, gloves, full suit and boots
The Material Safety Data provided on this website is correct to the best of our knowledge, information and belief at the date of its publication. The information given is designed only as a guide for safe handling, use, processing, storage, transportation, disposal and release and is not to be considered as a warranty or quality specification. The information relates only to the specific material designated and may not be valid for such material used in combination with any other material or in any process, unless specified in the text.
Product will perform as indicated by product specification sheet. Any adulteration will negate LunaCrete liability. | PART B
Evaluation for OSHA HCS: Non-Hazardous
GENERAL INFORMATION
Chemical Family: MIXTURE
HAZARDOUS INGREDIENTS
Principal Hazardous Components
Glycidoxypropyl trimethoxysilane (2530-83-8)
Threshold Limit Value (Units)
NE
2,butoxy ethanol (111-76-2)
Threshold Limit Value (Units)
50 ppm
PHYSICAL DATA
Boiling Point (ºF)~212° F
Specific Gravity (H20=1) ~1.04
Vapor Pressure (mm Hg) NE
Percent Volatile By Volume NA
Vapor Density (Air=1) >1
Evaporation Rate (H2O=1) ~1
Solubility in Water partial
pH NA
Appearance & Odor: Clear straw color liquid with slight solvent odor
FIRE & EXPLOSION HAZARD DATA
Flash Point (Test Method): >140° F (TCC)
Flammable Limits:
LEL NE
UEL NE
Extinguishing Media: Water, dry chemical, CO2, foam
Special Fire Fighting Procedures: Wear self contained breathing apparatus and protective clothing. Cool containers with water spray.
Unusual Fire & Explosion Hazards: None known
HEALTH HAZARD DATA
OSHA Permissible Exposure Limit NE
ACGIH Threshold Limit Value NE
Carcinogen
NTP Program NO
IARC Program NO
Symptoms of Over Exposure:
EYES: Irritation, redness. –
INHALATION: Irritation to nose and throat, possible headache. –
INGESTION: Nausea, headache, stomach upset. Product may generate methanol which can cause blindness. –
SKIN: Mild irritation, drying.
Medical Conditions Aggravated by Exposure: Skin sensitivity.
Primary Route(s) of Entry: Skin
Emergency First Aid:
EYES: Flush with water for 15 minutes, lifting both eyelids. If irritation persists, GET MEDICAL HELP.
INGESTION: Do Not Induce Vomiting. Rinse mouth with water and GET IMMEDIATE MEDICAL HELP. Never give anything by mouth to an unconscious person.
INHALATION: Remove to fresh air immediately. If breathing difficulties continue, GET MEDICAL HELP.
SKIN: Wash with soap and water. Remove and launder contaminated clothing before reuse.
REACTIVITY DATA
Stability
Stable
Conditions to Avoid: High temperatures
Incompatibility Materials to Avoid: Strong oxidizing agents. Water can cause methanol liberation.
Hazardous Polymerization No
Conditions to Avoid: NA
Hazardous Decomposition Products: CO, organic vapors.
ENVIRONMENTAL PROTECTION PROCEDURES
Spill Response: Extinguish all flames. Wear protective gloves. Absorb on absorbent material and place in a sealable can.
Waste Disposal Method: Seal can and dispose of in accordance with local and federal regulations.
SPECIAL PROTECTION INFORMATION
Eye Protection: Goggles
Skin Protection: Solvent resistant gloves
Respiratory Protection (Specific Type): NA
Ventilation Recommended:
General Mechanical
Other Protection: None
Hygienic Practices in Handling & Storage: Wash hands after using. Do not contaminate food or feed stuff.
Precautions for Repair & Maintenance of Contaminated Equipment: Flush thoroughly with water.
Other Precautions: Read all label directions and precautions. Keep from freezing.
TRANSPORT INFORMATION
Identification Number NA – Non-hazardous
Proper shipping name NA
Class/Division NA
Packaging Group NA |
For additional information contact: LunaCrete® 1111 H. Enterprise Court Holly Hill, FL 32117 (866) 386-9122 - Toll Free |  | If you have already purchased access to an online video, |
|
|
Professional Products |
Online Catalog |
Complete DVD Set |
|
