2012.02.05
Powdered Release

$ 44.95
Shipping Costs Vary About Shipping...
Call us for Availability

LunaCrete® Powdered Release is available in 28 color variations. Powdered Release is a dry blend of Proprietary ingredients and coloring pigments designed to allow the clean release of texturing tools from the wet concrete surface. LunaCrete’s Release agent adds color variations and highlights to the textured surface, providing an attractive two-color antiqued look that very closely resembles natural materials such as cobblestone, brick, tile, and slate.
Printable Version
LunaCrete® Powdered Release agent is designed to create a moisture barrier
between freshly poured concrete and imprinting tools. It will also add an accent
color.
Directions for Stamped Concrete: Fluff powder and broadcast a thin layer over the area prior to stamping. Do not trowel into the surface, as this will cause discoloration.
Directions for Stamped Curbing: Fluff Powder and pour 1 inch into a low flat tray. Dip matt or roller into tray and apply to curbing surface. Repeat as necessary to ensure that the amount of Release is even along the length of the curbing. Do not trowel into the surface.
WARNING: Harmful to lungs, do not inhale. Wear appropriate breathing protection

LIMITED WARRANTY: This product is warranted to be of uniform quality within manufacturing tolerances. Since no control is exercised over its use, no warranty expressed or implied, is made as to the effect of such use. Seller’s and Manufacturer’s obligation under this Warranty shall be limited to refunding the purchase price of that portion of the material proven to be defective.
Material Safety Data
for Powdered Release
SUPPLIER IDENTIFICATION
LunaCrete®
1111 H. Enterprise Court
Holly Hill, FL 32117
386-252-4243

Emergency Phone Number:
1-800-424-9300

Powdered Release may be used to comply with OSHA's Hazard Communication Standard (HCS), 29 CFR 1910, 1200. Standard must be consulted for specific requirements.

The precise composition of this product is proprietary information. A more complete disclosure can be provided in the event of a medical emergency.

HMIS
Hazardous Materials Identification System
HEALTH
1
FIRE
0
REACTIVITY
0
PROTECTION
E
HMIS Number Codes
4 - Severe
3 - Serious
2 - Moderate
1 - Slight
0 - Minimal

HMIS Protective Equipment Codes
A - safety glasses
B - safety glasses and gloves
C - safety glasses, gloves and an apron
D - face shield, gloves and an apron
E - safety glasses, gloves and a dust respirator
F - safety glasses, gloves, apron and a dust respirator
G - safety glasses, a vapor respirator
H - splash goggles, gloves, apron and a vapor respirator
I - safety glasses, gloves and a dust/vapor respirator
J - splash goggles, gloves, apron and a dust/vapor respirator
K - airline hood or mask, gloves, full suit and boots



The Material Safety Data provided on this website is correct to the best of our knowledge, information and belief at the date of its publication. The information given is designed only as a guide for safe handling, use, processing, storage, transportation, disposal and release and is not to be considered as a warranty or quality specification. The information relates only to the specific material designated and may not be valid for such material used in combination with any other material or in any process, unless specified in the text.

Product will perform as indicated by product specification sheet. Any adulteration will negate LunaCrete liability.
HAZARDOUS INGREDIENTS/IDENTITY INFORMATION

HAZARDOUS COMPONENTS
N/A
OCCUPATIONAL EXPOSURE LIMITS
CAS # OSHA PEL
ACGIH TLV
N/A
VAPOR PRESSURE
mm Hg @ TEMP
N/A
WEIGHT
PER CENT
N/A

PHYSICAL/CHEMICAL CHARACTERISTICS
BOILING RANGE: N/A
SPECIFIC GRAVITY (H2O = 1) :1.06
VAPOR DENSITY: Heavier than air
EVAPORATION RATE: N/A
MATERIAL V.O.C. : N/A
SOLUBILITY IN WATER: NO
APPEARANCE & ODOR: Dry Powder, Various Colors, Slight Odor

FIRE & EXPLOSION HAZARD DATA
FLASH POINT: N/A
FLAMMABLE LIMITS IN AIR BY VOLUME- LOWER: N/A UPPER: N/A
EXTINGUISHING MEDIA N/A
SPECIAL FIREFIGHTING PROCEDURES N/A
UNUSUAL FIRE & EXPLOSION HAZARDS N/A

REACTIVITY DATA
STABILITY: STABLE
CONDITIONS TO AVOID: NONE
INCOMPATIBILITY (MATERIALS TO AVOID)
Avoid contact with strong Acid
HAZARDOUS DECOMPOSITON OR BYPRODUCTS: NONE
HAZARDOUS POLYMERIZATION: WILL NOT OCCUR

HEALTH HAZARD DATA

INHALATION HEALTH RISKS AND SYMPTOMS OF EXPOSURE
Inhalation may cause irritation of respiratory tract and could promote coughing, dizziness and headache.
EYE CONTACT HEALTH RISKS AND SYMPTOMS OF EXPOSURE
Eye contact: Direct contact irritates slightly with redness and swelling.
SKIN ABSORPTION HEALTH RISKS AND SYMPTOMS OF EXPOSURE
Prolonged exposure can dry and defat skin causing cracks, irritation and dermatitis
INGESTION HEALTH RISKS AND SYMPTOMS OF EXPOSURE
Ingestion: Can cause gastrointestinal irritation.
HEALTH HAZARDS (ACUTE & CHRONIC)
Acute: Eyes: Slight irritation with redness. Skin: No adverse effect.
Inhalation: Irritates respiratory passage
Ingestion: Large amounts may cause digestive discomfort.
Chronic: None known.
CARCINOGENICITY:
NTP: NO
IARC MONOGRAPHS: NO
OSHA REGULATED: NO
MEDICAL CONDITIONS GENERALLY AGGRAVATED BY EXPOSURE
Dermatitis, respiratory tract irritation.
EMERGENCY AND FIRST AID PROCEDURES
Inhalation: Remove to fresh air. If not breathing, provide artificial respiration. If breathing is difficult, give oxygen. Get medical attention.
Ingestion: If swallowed vomiting may occur spontaneously, but do not induce. If vomiting occurs keep head below hips to prevent aspiration into lungs. Never give anything by mouth to an unconscious person. Call a physician immediately.
Skin Contact: Wash with soap and water.
Eye Contact:Immediately flush with plenty of water, lifting upper and lower eyelids occasionally. If irritation persists, get medical attention.

PRECAUTIONS FOR SAFE HANDLING & USE

STEPS TO BE TAKEN IN CASE MATERIAL IS RELEASED OR SPILLED
Sweep up material and remove to disposal container. Mop with mild detergents or cleaning solutions. Observe all relevant federal, state and local laws.

WASTE DISPOSAL METHOD
Normal waste disposal. Obey relevant laws.

PRECAUTIONS TO BE TAKEN IN HANDLING & STORING
Handling: No special precautions. Storage: No special precautions. Use reasonable care.

OTHER PRECAUTIONS
Before using any LunaCrete products, read the label thoroughly.


CONTROL MEASURES

RESPIRATORY PROTECTION
Dust mask recommended- NIOSH or OSHA approved

VENTILLATION
Use local exhaust ventilation to control emissions at its source, preventing dispersion of it in the general work area.

PROTECTIVE GLOVES
Gloves may be worn for protection if skin is sensitive. (latex, neoprene, nitrile rubber)

EYE PROTECTION
Use safety glasses, goggles or face-shields for eye protection.

OTHER PROTECTIVE CLOTHING OR EQUIPMENT
NONE

WORK/HYGIENE PRACTICES
Avoid breathing dust. Wash hands thoroughly after handling and keep containers closed.



For additional information contact:
LunaCrete®
1111 H. Enterprise Court
Holly Hill, FL 32117
(866) 386-9122 - Toll Free