2012.02.05
Online Catalog
Enter keyword
Klear Koat VOC

$ 149.00
Shipping Costs Vary About Shipping...
Call us for Availability

KLEAR KOAT VOC IS A SOLVENT BASED PURE ACRYLIC COATING THAT FORMS A TOUGH CRYSTAL CLEAR COATING THAT SEALS, BEAUTIFIES, AND PROTECTS ALL CONCRETE SURFACES. IT IS COLORLESS, AND NEVER YELLOWS.
Printable Version
Enviromental Impact
KlearKoat VOC contains no chlorinated solvents or other ozone depleting solvents, and it is VOC compliant in NJ, NY and other NE US states.



Applications
KlearKoat VOC is available in various concentrations, and is applied by brush, roller or sprayer onto cured dry concrete. Applied over concrete stains, KlearKoat VOC seals, enhances the color, and locks in the color to produce a permanent and beautiful stained floor. Once dry, a second coat may be applied to enhance the floor



Benefits
Clear and Colorless: KlearKoat VOC goes on water white and never yellows.

Seals and Beautifies: KlearKoat VOC penetrates into the pores of the concrete and seals out dirt and stains as it seals in beauty.

Dries to a smooth, tough, glossy finish: KlearKoat VOC flows and levels to prevent brush strokes or roller marks, and dries smooth and glossy.

Available in various solids levels: KlearKoat VOC can be applied at 25%
or 30% for normal or heavy seal. Successive coats always bond together.

Dries quickly: The active solvent system in KlearKoat evaporates quickly and
completely leaving only the acrylic polymer. Once dry, all flammable solvents is gone
and the area is safe and ready to use.

Accepts water based polish: For use indoors, the finished coating can be over
coated with a water based polish to act as a renewable wear surface.


How To Use
Always assure good ventilation when using KlearKoat VOC.

1. KlearKoat may be applied by brush, roller, solvent resistant pump up sprayer, or lambs wool applicator. Apply a thin uniform coat at the rate of one gallon to 400 ft. (40 m.)

2. Allow coating to dry for 4-6 hours and apply a second coating for maximum durability.

3. Equipment may be cleaned with Xylene or lacquer solvent.


Properties
Type: VOC compliant Solvent based pure acrylic coating
Colors: Colorless and clear.
Odor: Solvent
Toxicity: Harmful if swallowed. avoid breathing vapors
VOC's: Compliant in NE USA
Flammability: Flammable
Composition: Pure high molecular weight acrylic polymer in VOC compliant solvent base.
Material Safety Data
for Klear Koat VOC
SUPPLIER IDENTIFICATION
LunaCrete®
1111 H. Enterprise Court
Holly Hill, FL 32117
386-252-4243

Emergency Phone Number:
1-800-535-5053

Klear Koat VOC may be used to comply with OSHA's Hazard Communication Standard (HCS), 29 CFR 1910, 1200. Standard must be consulted for specific requirements.

The precise composition of this product is proprietary information. A more complete disclosure can be provided in the event of a medical emergency.

NFPA
National FireProtection Association
TOXICITY [HEALTH]
1
FIRE
2
REACTIVITY
0
SPECIAL
B
NFPA Number Codes
4 - Extreme
3 - High
2 - Moderate
1 - Slight
0 - Insignificant

HMIS
Hazardous Materials Identification System
HEALTH
1
FIRE
2
REACTIVITY
0
PROTECTION
HMIS Number Codes
4 - Severe
3 - Serious
2 - Moderate
1 - Slight
0 - Minimal

HMIS Protective Equipment Codes
A - safety glasses
B - safety glasses and gloves
C - safety glasses, gloves and an apron
D - face shield, gloves and an apron
E - safety glasses, gloves and a dust respirator
F - safety glasses, gloves, apron and a dust respirator
G - safety glasses, a vapor respirator
H - splash goggles, gloves, apron and a vapor respirator
I - safety glasses, gloves and a dust/vapor respirator
J - splash goggles, gloves, apron and a dust/vapor respirator
K - airline hood or mask, gloves, full suit and boots



The Material Safety Data provided on this website is correct to the best of our knowledge, information and belief at the date of its publication. The information given is designed only as a guide for safe handling, use, processing, storage, transportation, disposal and release and is not to be considered as a warranty or quality specification. The information relates only to the specific material designated and may not be valid for such material used in combination with any other material or in any process, unless specified in the text.

Product will perform as indicated by product specification sheet. Any adulteration will negate LunaCrete liability.
Evaluation for OSHA HCS: Hazardous

GENERAL INFORMATION
Chemical Family: Mixture

HAZARDOUS INGREDIENTS

Principal Hazardous Components
Acetone (67-64-1)
Threshold Limit Value (Units)
500 ppm
Aromatic Solvent (64742-95-6)
Threshold Limit Value (Units)
50 ppm (estimated)

PHYSICAL DATA

Boiling Point (ºF) ~57º C
Specific Gravity (H20=1) ~0.89
Vapor Pressure (mm Hg) NE
Percent Volatile By Volume NA
Vapor Density (Air=1) >1
Evaporation Rate (H2O=1) >1
Solubility in Water Insoluble
pH NA
Appearance & Odor: Colorless liquid with a solvent odor.

FIRE & EXPLOSION HAZARD DATA
Flash Point (Test Method): 82º F (TCC) Flammable Limits: will not burn
LEL 2.5 UEL 12.8
Extinguishing Media: Foam, Dry Chemical, CO² , Sand or Earth.
Special Fire Fighting Procedures - Cool fire exposed containers with water. Wear NIOSH/MSHA approved self contained breathing apparatus.
Unusual Fire & Explosion Hazards: Over heated or burning product will boil off flammable fumes and or generate heavy smoke.

HEALTH HAZARD DATA OSHA
Permissible Exposure Limit NE
ACGIH Threshold Limit Value NE
Carcinogen - NTP Program NO Carcinogen - IARC Program NO
Symptoms of Over Exposure: Inhalation: Headache, dizziness, narcosis. Skin: Drying, redness, irritation, CNS depression.
Eyes: Redness, pain, blurred vision. Ingestion: Nausea, abdominal pain, diarrhea, toxic reaction, CNS depression.
Medical Conditions Aggravated by Exposure: NE
Primary Route(s) of Entry: Inhalation, skin.
Emergency First Aid:
Inhalation: Remove to fresh air immediately. If dizziness, headache or discomfort persist, Get Medical Help. Skin: Wash thoroughly with soap and water or use a waterless hand cleaner. Remove and launder contaminated clothing before reuse.
Eyes: Flush thoroughly with water for 15 minutes, lifting both eyelids. If irritation persists, Get Immediate Medical Help.
Ingestion: Do Not Induce Vomiting. Get Immediate Medical Help. Never attempt to give anything by mouth to an unconscious person.

REACTIVITY DATA
Stability
Stable
Conditions to Avoid: Temperatures above 49º C (120˚ F), open flames or sparks.
Incompatibility Materials to Avoid: Strong oxidizing agents
Hazardous Polymerization No
Conditions to Avoid: NA
Hazardous Decomposition Products CO, organic vapors

ENVIRONMENTAL PROTECTION PROCEDURES
Spill Response: Eliminate all ignition sources. Confine spill and reclaim by mopping or collect on absorbent material. Store in a sealable container. Do not flush to drain.
Waste Disposal Method: Seal containers and dispose of at a waste site in accordance with local and federal regulations.

SPECIAL PROTECTION INFORMATION
Eye Protection: Goggles
Skin Protection: Solvent resistant gloves
Respiratory Protection (Specific Type): If used in an enclosed area without very good ventilation, wear face mask with organic vapor cartridge.
Ventilation Recommended: General Mechanical
Other Protection: NA
Handling precautions - Wash hands after handling. Do not contaminate food or feedstuff.
Precautions for Repair & Maintenance of Contaminated Equipment: Eliminate all ignition sources.
Other Precautions: Store in sealed original container only. Read all label precautions before using product.

TRANSPORT INFORMATION
Identification Number UN1866
Proper shipping name Coating solution
Class/Division 3
Packaging Group PGI



For additional information contact:
LunaCrete®
1111 H. Enterprise Court
Holly Hill, FL 32117
(866) 386-9122 - Toll Free