Enviromental ImpactENVIRO SEAL is a non-toxic, low VOC coating with no aromatic or chlorinated solvents for minimal environmental impact.
ApplicationsENVIRO SEAL is used as a final protective coating over Enviro Stained concrete floors, counter tops, and ect. for use indoors and out with low odor and no flammable hazard.
Benefits
Non-Flammable: ENVIRO SEAL has no flammable hazard when used inside or outside.

No hazardous fumes or odors: it is not necessary to wear protective breathing apparatus, and normal ventilation is adequate.

Fast drying: ENVIRO SEAL dries in 30 to 40 minutes, and can be re-coated in one hour normally. Two coats are recommended, but the floor can be walked on the same day

Non-slip and water resistant: The coating is not glossy, and does not present a hazardous walking surface wet or dry.

Extra protection in interior applications. After the coating has dried over night it can be top coated with EZGlo acrylic polish to produce a renewable wear surface. With normal easy regular maintenance, the ENVIRO SEAL will never wear out or need replacing.
How To Use
After the ENVIRO STAIN job has been rinsed and thoroughly dry, apply ENVIRO SEAL in two thin uniform coatings using a roller or a Lambs wool applicator

Allow the coating to dry for one hour before applying second coat.

Allow several hours drying before walking on floor
Properties Type: Super acrylic floor polish
Colors: Color, non-yellowing
Odor: Very mild
Toxicity: Low. Do not take internally
VOC’s: Low
Flammability: Non-flammable
pH: 8.5—8.9
Composition: Acrylic polymer emulsion,
ethylene copolymers, proprietary additives and
quality control agents