Enviromental Impact
Densicrete contains no VOC's and heavy metals that can contaminate the environment.


Applications
Densicrete is applied as a topical treatment on stained or ground and polished concrete to produce
a stronger, harder and denser wear resistant surface.


Benefits

Densicrete reacts with the lime in the concrete to produce a three dimensional bonded structure that protects and hardens deep into the concrete.

Does not wear out: the Densicrete system deep into the concrete does not need replacing or re-coating. It is a permanent treatment.

SAFE: Densicrete is non-flammable and contains no VOC's. It is completely water soluble and easy to clean up.

Ties up the surface and prevents the ''alkali silicate reaction'' (ASR) that can cause spalling and surface damage.

The ultimate small molecule, lithium silicate will penetrate to maximum depth for maximum protection.

Increases surface hardness up to 400% and protects against salt damage.

How To Use

SURFACE PREPARATION:
The surface must be clean and dry and free of dirt, oil or other contaminants. Use Citra Pro to remove oily contamination and then treat with SuperGreen to open the pours and ensure good penetration.

APPLICATION:
For best results work at temperatures between 45° and 100° Farenheit.
Test a small part of the surface for desired results.
New Concrete - Apply with a low pressure sprayer as a single wet coat approximately at 300sq. ft. per gallon. Treated surfaces must stay wet for 15 minutes. Very porous areas may require a second spray during the 15 minute period. Remove any remaining product after 15 minutes by rinsing or squeegee.


Properties
Type: Aqueous silicate solution
Colors: colorless
Odor: None
Toxicity: Harmful if swallowed
VOC's: None
Flammability: Non-Flammable
Composition: Inorganic silicates in aqueous solution.